As Nesteknik, our mission is to develop sustainable and efficient technologies with innovative engineering solutions.
Contact Us Nesteknik Kimya San. ve Tic. Ltd. Şti.Media Compatibility: All gases and liquids compatible with 316L stainless steel or Hastelloy-C
Process Connection: 1/4″ NPT; compatible with 3/8″, 1/2″ tube tee, 1/4" with 1/8" injection tube adapters and SP76 adapter (FCI part number 019897-01)
Flow Sensitivity/Range:
| Air / Gas | Liquids | |||||||
| CC/Min | SCFH | CC/Min | GPH | |||||
| Min | Max | Min | Max | Min | Max | Min | Max | |
| 1/8" tube adapter with 0.0625" ID injection tube | 10 | 2,000 | 0.02 | 5 | 0.70 | 18.00 | 0.01 | 0.30 |
| 1/8" tube adapter with 0.0940" ID injection tube | 25 | 5,000 | 0.05 | 10 | 1.50 | 40.00 | 0.03 | 0.60 |
| 1/4" tube tee | 50 | 20,000 | 0.10 | 40 | 4.00 | 100.00 | 0.07 | 1.70 |
| SP76 adapter | 50 | 20,000 | 0.10 | 40 | 4.00 | 100.00 | 0.07 | 1.70 |
| 3/8" tube tee | 180 | 50,000 | 0.40 | 100 | 14.00 | 350.00 | 0.20 | 5.50 |
| 1/2" tube tee | 375 | 100,000 | 0.80 | 200 | 30.00 | 750.00 | 0.50 | 12.00 |
Repeatability: ± 0.5% of reading
Tempature Compensation:
Standard: ± 30 ºF [± 16 ºC]
Optional Extended: ± 100 ºF [± 55 ºC]
Temperature Coefficient: For temperatures > ± 30 ºF [± 16 ºC] and with optional extended temperature compensation
Gas: Maximum ±0.025% of reading/ºF up to 500 ºF [± 0.05% of reading/ºC up to 260 ºC]
Liquid: Maximum ± 0.2% of reading/ºF up to 250 ºF [± 0.367% of reading/ºC up to 121 ºC]
Turndown Ratio: 5:1 to 100:1
Flow Element
Materials of Construction:
(Wetted parts) 316L stainless steel with Hastelloy C-22 thermowells; Optional, all Hastelloy C-22 probe assembly
Operating Temperature:
Standard: -40 °F to 250 °F [-40 °C to 121 °C]
Optional: -40 °F to 500 °F [-40 °C to 260 °C]; remote configuration only
Operating Pressure:
Tube tee fitting: Tube tee and insertion – 2000 psig [137 bar (g)]
SP76 adapter: Per SP76 manifold specifications up to 500 psi [34 bar(g)] maximum
Enclosure/Housing:
Material: Stainless steel body; aluminum end/top with polyester overlay and clear, silicone sheath impact guard.
Protection Ratings:
Non-Ex installations: IP65, IP66, IP67
FM, FMc approved: NEMA 4X
ATEX, IECEx approved: IP64
Transmitter/Electronics:
Operating Temperature: -40 °F to 160 °F [-40 °C to 71 °C]
Output Signals:
| Block 6, Order Code D | Block 6, Order Code E | |
| Open Collector N-Channel (100mA) | ■ | |
| Relay, SPDT; 1A @ 24 Vdc; 120 Vac (ATEX DC only) | ■ | |
| 4-20mA Trending Output * | ■ | ■ |
| RS232C Serial I/O | ■ | ■ |
Display: 10 LED array, red; sequential lighting proportional to flow trend and flashes at setpoint
User Interface: Two top-mounted push buttons to program switch/trip point, zero and span setting, relay hysteresis and time delay; button operation may be user disabled to prevent unwanted changes; all set-up functions also programmable via RS232C port
Input Power: 24 Vdc (21.5 to 32 Vdc); maximum 2.5 Watts
Remote Configuration: Transmitter/electronics are separated from flow element and interconnected with a cable; flow element has potted cable terminating in an M12 for direct plug-in connection with the electronics; cable lengths available in 6′, 15′ or 30′ [2 m, 5 m or 10 m] (maximum cable length is 100 feet [30m]); optional extended temperature service to 500 °F [260 °C] requires selection of the interconnecting cable with PTFE jacketing
Certifications and Ratings
| Nonincendive, Class I Division 2 Groups A, B, C, D; Class II, Division 2 Groups E, F, G; Class III, T4@Ta=71°C Type 4X |
| II 3 G Ex ec IIC T4 Gc II 3 D Ex tc IIIC T 81ºC Dc IP64* *(IP65,66,67 in Non-Ex Area) |
| Ex ec and Ex t Ex ec IIC T4 Gc II 3 D Ex tc IIIC T 81ºC Dc |
| CE Mark, CRN, Complies with Canadian Electrical code requirements of ANSI / ISA 12.27.01-2011 as a single seal device. |
| SIL 2 compliant, safe failure fraction (SFF) 90% |
